Back To Website
Thunder Laser USA
Nova Pro 35
Nova Pro 35
Our Nova Pro 35 is our fastest, smartest Nova yet: up to 2,000 mm/s with 4G acceleration, the Bolt and Titan touchscreen, and a redesigned cabinet with the air pump and exhaust fan built in. A head camera comes pre-installed at the factory for print and cut in LightBurn, backed by our support team. 35.4" x 23.6" work area.
Lead times vary by machine model and order volume. If you have specific timing needs, contact us before ordering for confirmation. Please note that if you cancel your order, a 3% cancellation fee will apply to cover processing fees incurred by Thunder Laser USA. For questions or concerns, reach out before completing your purchase. Thank you for your support!
Couldn't load pickup availability
Speak to an expert
Fast & Secure
-
-
-
-
-
-
-
-
View full details
- Description
- Material Capabilities
- Technical Specs
The Nova Pro 35 is our fastest, smartest Nova yet. It engraves at up to 2,000 mm/s with 4G acceleration, uses the same 5" touchscreen as our Bolt and Titan series, and has a fully redesigned cabinet with the air pump and exhaust fan built inside.
It also comes with a head camera pre-installed at the factory, so you can print on your UV printer and cut every piece right on its outline in LightBurn. We build the Nova Pro in three sizes, named by how wide the work area is: 35", 51" and 63". The Nova Pro 35 gives you a 35.4" x 23.6" work area.
Faster Than the Nova Plus
- Engraving speeds up to 2,000 mm/s, up from 1,200 mm/s on the Nova Plus
- 4G acceleration, up from 2.5G, so the head gets up to speed sooner and jobs finish faster
- Leadshine AC servo on the X axis and 0.0004" positioning accuracy
- 60W RF (SPT ET-60) laser source as standard
New Touchscreen Display
- The same touchscreen we use on our Bolt and Titan series, an upgrade from the Nova Plus
- 5" capacitive screen with file previews, job time, status icons and plain-language alerts
- Fast and slow jog control right from the screen
Redesigned Inside and Out
- A full redesign with a more modern, sleek cabinet
- Air pump and exhaust fan built inside the machine, so there are no extra components sitting next to it
- Enclosed side rails keep smoke and debris off the rails and the bearings and belts that ride on them
- Protective window lens keeps dust off the optics
Focus Made Simple
- Autofocus plus a fixed focus rod for soft materials and long-focus work
- Every lens tube sits at the same 0.2" nozzle height, so autofocus works with all four lenses
- Color-coded, split lens tubes: remove the lower section for extra focal length on recessed engraving
Built for Production
- Front-to-rear pass-through for long stock
- Motorized Z table fits parts up to 8.9" tall
- Aluminum blade table and honeycomb table included
- Built-in rotary port, ready for a rotary chuck
Smarter Day-to-Day Operation
- Overhead camera standard too, so you can line up designs right on your material in LightBurn
- Dual-channel air assist with a digital flow meter and low-pressure protection that pauses the job
- Air pump and exhaust fan turn on and off with each job
Print and Cut, Ready Out of the Box
- Head camera comes pre-installed at the factory, backed by our support team
- Reads the registration marks on UV-printed leatherette, acrylic, wood and more, then cuts each piece right on its outline
- Runs in LightBurn, which comes included with every Nova Pro
1Print2Place3Scan4Cut
Safety and Durability
- Key switch, E-stop, 10 door sensors and a tower light
- Overheat alarm at 131°F homes the head and pauses the job
Every Nova Pro Includes
- LightBurn software, licensed for two computers, no subscription
- One free hour of one-on-one remote training
- 2-year machine warranty
- US-based support, coast to coast, with parts stocked in Quitman, Texas
| Material | Engrave | Cut |
|---|---|---|
| Wood |  |
|
| Acrylic | |
|
| Fabric | |
|
| Glass | |
x |
| Coated Metals | |
x |
| Ceramic | |
x |
| Delrin | |
|
| Cloth | |
|
| Leather | |
|
| Marble | |
x |
| Matte Board | |
|
| Melamine | |
|
| Mother of Pearl | |
|
| Paper | |
|
| Mylar | |
|
| Pressboard | |
|
| Rubber | |
|
| Wood Veneer | |
|
| Fiberglass | |
|
| Painted Metals | |
x |
| Tile | |
x |
| Plastic | |
|
| Cork | |
|
| Corian | |
|
| Anodized Aluminum | |
|
| Stainless Steel | * | |
| Brass | * | |
| Titanium | * | |
| Bare Metals | * |
*CO2 lasers will mark bare metals when coated with a metal marking solution.
| Work Area | 35.4" x 23.6" |
| Work Platform Size | 39.0" x 27.2" |
| Max Material Size (door closed) | 36.7" x 25.6" x 8.9" |
| Max Material Width (pass-through) | 37.8" wide, unlimited length. Pass-through opening is 0.79" tall and accepts material up to 0.59" thick. |
| Max Work Height / Z Travel | 8.9", motorized Z table |
| Max Platform Load | 331 lb |
| Standard Laser | 60W RF (SPT ET-60), air-cooled |
| Laser Options | 60W SPT ET-60 and 80W SPT ET-80 (air-cooled). 100W and 120W Luxinar (air-cooled) by special order. |
| Max Engraving Speed | 2,000 mm/s |
| Max Cutting Speed | 300 mm/s |
| Acceleration | 4G (40,000 mm/s²) |
| Positioning Accuracy | 0.0004" |
| Z-Axis Accuracy / Resolution | 0.0010" / 0.004" |
| Motion System | Leadshine AC servo on the X axis, Leadshine 2-phase stepper on the Y axis |
| Lenses | 2.5" standard; 1.5", 2.0" and 4.0" optional. Autofocus works with all four. |
| Min. Spot Diameter | 1.5": 0.0049" · 2.0": 0.0051" · 2.5": 0.0060" · 4.0": 0.0076" |
| Laser Frequency (SPT) | 25 kHz |
| Work Tables | Aluminum blade table and honeycomb table included |
| Head Camera | Standard, installed at the factory. Reads registration marks for print and cut in LightBurn. |
| Overhead Camera | Standard. Works in LightBurn on Windows and Mac. |
| Air Assist | Built-in air pump. Dual-channel air assist with digital flow meter and low-pressure protection. 0.12" and 0.24" nozzles included. |
| Control Panel | 5" capacitive touchscreen, same display as our Bolt and Titan series |
| Rails | Enclosed side rails protect the rails, bearings and belts from smoke and debris |
| Memory | 1 GB |
| Connections | Ethernet, USB, USB drive, Thunder Air purifier port, built-in rotary port |
| Software | LightBurn included, licensed for two computers. Also compatible with LaserMaker and RDWorks. |
| Voltage | 110V, single phase |
| Electrical Requirement (110V) | Dedicated 20A circuit |
| Machine Current / Power (110V) | 60W: 10A, 1,000W 80W: 13A, 1,300W |
| Ventilation | Built-in exhaust fan; 5.7" port |
| Noise Level | 51.3 dB standby / 62.8 dB full-power engraving (60W) |
| Safety | Key switch, E-stop, 10 door sensors, tower light, overheat alarm at 131°F that homes the head and pauses the job |
| Overall Dimensions (L x W x H) | 59.8" x 48.2" x 43.9" (includes 1.6" door handle) |
| Crate Dimensions | 73" x 52" x 50" |
| Net Weight | 694 lb (with ET-80) |
| Shipping Weight | 937 lb (with ET-80) |
| Compliance | FDA Class II, CE |
| Warranty | 2 years on the machine. 12 months on the RF tube, air pump, exhaust fan and power supply. Lenses 30 days from delivery. |
| Training | One free hour of one-on-one remote training included |
| Support | US-based support, coast to coast. Parts stocked in Quitman, Texas. |
Specifications are subject to change. Imperial values converted from factory metric data and rounded.
2 Year Warranty
Thunder Laser offers a two year warranty on all our Laser Machines
Every Day Fair Pricing
At Thunder Laser, we believe in transparent, fair pricing every day.
4.9 on Trust Pilot
With more than 1000 reviews on TrustPilot, we are rated as Excellent service provider,
Free 1:1 Startup Training
Every Thunder machine owner can avail this Free one-on-one trainig to kickstart their startups